|
_________________________________________________________
 Attention
Super Cup Teams: Important Tech Update to SCSCS 2013 Rulebook
Effective
immediately the following change to the 2013 SCSCS rulebook will be
implemented and enforced. Changes to the Suspension section,
item 13 are shown below. A complete and updated copy of the
rulebook is available via the following link.
2013
Rulebook with 8-15 Addendum
|
13
Rear
suspension must be a coil spring type mounted on axle or trailing
arms inside the frame. Trailing arms must be equal length. Rear
axles must be held laterally by a steel panhard bar. The panhard bar
must be non-adjustable while in competition. Panhard must measure within
2” of each other from side to side (2 inch split maximum).
Fabricated steel
truck type trailing arms may be made of 2” x 3” x .120” steel
square tubing. Trailing arms must be one piece non-adjustable with
no sliding, hydraulic, or spring loaded mounting points or links.
Conventional metal or rubber bushings only.
|
_________________________________________________________
Click
Here for Information and Press Releases
|
